 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Composite Backshells CONNECTOR DESIGNATOR: with Keyed Banding Insert and Self-Locking Coupling 627-142 Composite Swing-Arm Strain Relief A A F H MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV Product Series 627 - Swing-Arm Strain Relief Basic Part Number Dash Number (See Table II) 627 A 142 XO 16 K Band Option K - Band (600-083) (Omit for None) SELF-LOCKING B ROTATABLE COUPLING LOW PROFILE Connector Designator A, F, H Finish Symbol (See Table III) Self-Locking Coupling Typ C J G H Captivated Self-Locking Telescoping Screws - Typ E Typ Closed D Straight Position .062 Min .250 Max Screw Protrusion Typ E M K Captive Position Screw Locks Swing Arm in 45 Incriments Screw Head Same Side - Typ F Accomodates 600-083-1 Micro-Band Only Termination Area Free of Cadmium 90 Position Shown 45 Position Shown Detail "B" Finish XN G (c) 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-100 with Keyed Banding Insert and Self-Locking Coupling 627-142 Composite Swing-Arm Strain Relief TABLE II: DASH NUMBER Shell Size A, F 08 10 12 14 16 18 20 22 24 H 09 11 13 15 17 19 21 23 25 E .031 .265 (6.7) .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .938 (23.8) G Max 1.06 (26.9) 1.09 (27.7) 1.18 (30.0) 1.24 (31.5) 1.32 (33.5) 1.39 (35.3) 1.55 (39.4) 1.55 (39.4) 1.61 (40.9) H Max .98 (24.9) 1.05 (26.7) 1.20 (30.5) 1.30 (33.0) 1.44 (36.6) 1.56 (39.6) 1.69 (42.9) 1.77 (45.0) 1.89 (48.0) J .06 .94 (23.9) .97 (24.6) 1.03 (26.2) 1.09 (27.7) 1.12 (28.4) 1.15 (29.2) 1.18 (30.0) 1.25 (31.8) 1.28 (32.5) K Diameter A, F and H Code .140 (3.6) .270 (6.9) .390 (9.9) .512 (13.0) .637 (16.2) .757 (19.2) .881 (22.4) 1.006 (25.6) 1.131 (28.7) TABLE III: FINISH Symbol XB XO Finish Description No Plating - Black Color (Non-Conductive Finish) No Plating - Brown Color (Non-Conductive Finish) APPLICATION NOTES 1. 2. 3. 4. Metric dimensions (mm) are in parentheses and are for reference only. Glenair series 600 Backshell assembly Tools are recommended for assembly and installation. Swing Arm locks in 45 increments-Sizes 10 thru 24, additional positioning increments are manufacturer's option. Captive Screw can remain engaged to the body when positioning the Arm. When tightened, the Screw shall not protrude into the inside surfaces. 5. 6. 7. 8. Coupling nut supplied unplated. Consult factory for additional entry sizes available. See Table I in Intro for front-end dimensional details. K diameter may be smaller than required to accomodate fully populated connector. Consult engineering department for additional information. (c) 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-101 Composite Backshells A B C D E F G |
Price & Availability of 627H142XO
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |